MINI Carbon Fibre Exhaust Tips Fitting Guide
Fitting Guides / MINI carbon fibre exhaust tips
Both tips slide over the original tips at the same time. Leave the factory tips installed. Not compatible with the JCW Pro exhaust system.
This guide provides general fitting guidance. Vehicle designs, fixings and fittings vary. Check compatibility before starting, work carefully and never force any component. Stop and seek fitting assistance if you are unsure or encounter resistance.
You are responsible for carrying out the installation carefully. Auto Haus Carbon is not responsible for damage caused during installation or while following this guide, except where liability cannot lawfully be excluded. This does not affect your statutory rights.
Shop MINI carbon fibre exhaust tips · Ask a fitting question
Tap the graphic to open it at full size.
How to fit the tips
- Park securely, switch off and let the exhaust cool completely.
- Check the fit and back off the grub screws enough to clear the original tips.
- With the screws facing down, slide both covers over the original tips together. Stop if either binds.
- Align both tips evenly and check bumper clearance.
- Use the supplied Allen key to tighten each grub screw upward from underneath, around the centre of each tip.
- Check both tips are secure and cannot twist or slide off.