BMW G Series Start/Stop Button Cap Fitting Guide
Fitting Guides / BMW G Series start/stop button
Follow this visual guide when fitting a matching replacement BMW G Series start/stop button cap. Compare your existing cap shape and mounting with the replacement before starting. Console designs and cap fittings vary; the illustrations are schematic.
This method is for matching replacement caps only. Remove the cap, not the switch assembly. If the cap resists removal, stop and contact us rather than levering against the surrounding trim or forcing incompatible parts.
Shop the BMW G Series start/stop replacement button · Ask a fitment or fitting question
This guide provides general fitting guidance. Vehicle designs, fixings and fittings vary. Check compatibility before starting, work carefully and never force any component. Stop and seek fitting assistance if you are unsure or encounter resistance.
You are responsible for carrying out the installation carefully. Auto Haus Carbon is not responsible for damage caused during installation or while following this guide, except where liability cannot lawfully be excluded. This does not affect your statutory rights.
Tools required
- Clean microfibre cloth
- Extractor putty
- Matching replacement start/stop button cap
The illustrated alternative is a glue-stick puller. Allow the glue to cool and set before pulling.
How to replace the button cap
- Prepare. Park safely, apply the parking brake and switch the ignition off. Keep the key away from the vehicle.
- Clean and dry. Wipe the original button face with a clean microfibre cloth. Let it dry fully.
- Apply and bond. Press extractor putty firmly onto the cap face. Form a grip and allow it to bond.
- Pull straight. Pull firmly straight away from the button face, removing the cap only. If it resists, stop. Reapply the puller or contact us. Do not lever against the trim.
- Clean and align. Remove residue without letting it fall into the switch. Remove any protective film and align the new cap.
- Press and check. Press the cap straight into place until seated. Check that it moves freely and returns normally. Restore the key and check normal operation while safely parked.
Need help with fitment or installation?
Send Auto Haus Carbon your vehicle model, year, chassis code and clear photographs of the existing button and replacement. We are on hand with technical advice and fitting guidance for you or your installer.
Get fitment and fitting help · Browse fitting guides · View the matching product
Illustration notice: Images are provided for illustrative guide purposes only and may not accurately represent the size, shape, dimensions, proportions or scale of your vehicle, parts, tools or fittings. Designs, access points, fixings and wiring may differ. Always check the actual components and product fitment information before starting.